Polyken Butyl Rubber Pipeline Joint Tape

If you are looking for China golden supplier and China good supplier polyken butyl rubber pipeline joint tape, good quality and high quality polyken butyl rubber pipeline joint tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.

System Description

polyken butyl rubber pipeline joint tape is a cold applied tape coating system designed for the corrosion protection of field joints, fittings, and specialty piping. The unique adhesive retains conformability over a wide temperature range, yet exhibits an elevated level of shear resistance, which is a key in-ground performance characteristic. Coupled with a pliable, very malleable polyethylene backing, this versatile tape system can be applied by hand or with a wrapping machine.

Polyken-930 Cold applied tape coating system for anti-corrosion of field joints,fittings, and specifically pipeing. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. 

The Joint wrap tape shall be applied by hand or with a wrapping machine.

Butyl waterproof tape is a lifelong, non-adhesive stickers waterproof sealing tape, is made of butyl rubber, the main raw material, supplemented by other additives. The surface of a variety of building materials have a strong adhesion. Excellent weather resistance, aging resistance and excellent water resistance. The adhesion of the surface is sealed, shock absorption, protection and other functions. Because it does not contain solvents, so it does not shrink, will not discharge toxic gases, construction convenience, is an excellent sealing material.

Features 1) to maintain a permanent flexibility, adhesion, can withstand a certain displacement, deformation and good follow-up. 2) excellent waterproof sealing and chemical resistance, anti-ultraviolet (sunshine) capacity; more than 20 years of service life. 3) easy to use, the amount of accurate, reduce waste, cost-effective. 4) no solvent, safe and environmentally friendly.

The main purpose of the 1 is to overlap between the steel roof steel plate and the steel plate and fall into the drain seal. 2 doors and windows, concrete roof, ventilation pipe seal waterproof. 3) pc board, durable board installation. 4 car doors and windows waterproof film paste, sealed seismic.

1) According to the construction method of the groove or color steel plate, according to the engineering design requirements, choose the appropriate waterproof tape size; 2) the water, oil, dirt and other impurities completely remove the surface of the color paste to keep the surface clean; 3) from the end of the color steel plate, double-sided tape along the joint line will be the adhesive tape on the board, and then from the light to the weight of the tape, and the color plate bonded firmly; 4) tear tape upper paper, The upper plate is pressed into the color combination of the interface, and the joint is firmly sealed after pressing the pressure in the sequential joint.

Main technical indicators of the project unit Basic detection value of single component Butyl rubber Heat resistance 90 ℃, 2h Free flow flexibility at low temperature -40 ℃ No crack baseball 13.5 Elongation of% 420% 75 g / m2 20h68 c Good Moisture permeability, density g / cm31.35 + 0.05 peel strength aluminum plate n / cm3.9 color steel plate / cm35.5 cement mortar board n / cm38.6 copper n / cm34.1 glass plate n / cm37.3 Note: 1 ) In addition to 24hr0 anti-aging temperature flexibility, the other performance test conditions than 23 ℃. 2) product life of more than 20 years, anti-u. $ Modeltype hours for one year. 5, packaging carton packaging, according to customer requirements packaging

Color black, gray, white or other colors 7 According to user requirements, storage and validity should be stored in a cool dry place below 27 degrees Celsius, since the date of production, the storage period of December

Note 1) Before use, remove water, oil, dust and other dirt from the surface of the steel plate. 2) Tape should be stored in a cool dry place, to avoid heat, direct drying or rain. 3) The product is self-adhesive material, once the paste in place to achieve the best waterproof effect.

Features 

-Heavy duty adhesive

-Resistant to UV

-Can be applied over a wide temperature range 

-Good conformability and consistent uniform thickness

-Easily applied with no realise liner

-Conformable to irregular shapes.

-Cold applied

Properties

Ordering Information

POLYKEN 930 tape coatings are in roll form.

Eg.: POLYKEN 930-35  BLK  4"×;50'